ZARF1560-TV Needle roller/axial cylindrical roller bearings

ZARF1560-TV
Needle roller/axial cylindrical roller bearings

double direction, for screw mounting

d	15  mm
D	60  mm
H	40  mm

	M6	Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data.
B	7,5  mm
C	14  mm
C1	8  mm
D1	35  mm
Da max	36  mm	Mounting dimensions If rotary shaft seals are used, the outside diameter of the sealing ring must be taken into consideration.
d1	3,2  mm
da min	28  mm	Mounting dimensions If rotary shaft seals are used, the outside diameter of the sealing ring must be taken into consideration.
H1	26  mm
J	46  mm
na x ta	6 x 60  °	Number x pitch Screw mounting holes
n x t	6 x 60  °	Fixing screws to DIN EN ISO 4762 10.9 Number x pitch Screws not included in scope of delivery. Tightening torque according to manufacturer’s data.
r1 min	0,6  mm
rmin	0,3  mm
t1	0,1  mm

m	0,42  kg	Mass
Ca	24900  N	Basic dynamic load rating, axial
C0a	53000  N	Basic static load rating, axial
Cr	13000  N	Basic dynamic load rating, radial
C0r	17500  N	Basic static load rating, radial
Cua	7300  N	Fatigue limit load, axial
Cur	2600  N	Fatigue limit load, radial
nG Öl	8500  1/min	Limiting speed for oil lubrication (valid only with adequate oil cooling)
nG Fett	2200  1/min	Limiting speed for grease lubrication
MRL	0,35  Nm	Bearing frictional torque
caL	1400  N/µm	Axial rigidity
ckL	110  Nm/mrad	Tilting rigidity
Mm	0,24  kg * cm^2	Mass moment of inertia for rotating inner ring
	1  µm	Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
	ZMA15/33	Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
	AM15	Recommended INA precision locknuts with axial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA	10  Nm	Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements.
	6506  N	Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts.

All content on our Blog originated from：http://www.bearingkingdom.com/